Finlux 47F9076-T Instrukcja Użytkownika Pobierz pdf (Strona 19)

English - 18 -

IP Address

If an active connection is available, the IP address will

be displayed on this section. If you want to congure

an IP address preferences, press the GREEN button

and switch to the advanced mode.

ConguringWiredNetworkSettingsin

Advanced Mode

After pressing the GREEN button, the “Advanced

mode” will be available. While in Advanced Mode,

press the RED button to edit settings. When

nished, press OK to save, Press RETURN/BACK

to cancel.

Wireless Connectivity

To Connect to a Wireless Network

IMPORTANT: “Veezy 200” USB dongle is required

to use wireless network features.

• To make your modem’s SSID visible, you should

change your SSID settings via the modem’s

software. The TV cannot connect to the networks

with a hidden SSID.

To Connect to a wireless LAN, you should

perform the following steps:

1. Ensure that Nero Media Home software is

installed to your PC (for DLNA function).

2. Then connect the wireless adaptor to one of the

USB inputs of the TV.

3. To congure your wireless settings please refer

to the Network settings section in this manual.

Broadband

ISP

connection

Wireless LAN

adaptor

USB inputs

rear left side

of the TV

• A Wireless-N router (IEEE 802.11a/b/g/n) with

simultaneous 2.4 and 5 GHz bands is designed

to increase bandwidth. These are optimized for

smoother and faster HD video streaming, file

transfers and wireless gaming.

• Use a LAN connection for quicker file sharing

between other devices like computers.

• The frequency and channel differ depending on the

area.

• The transmission speed differs depending on the

distance and number of obstructions between the

transmission products, the conguration of these

products, the radio wave conditions, the line trafc

and the products that you use. The transmission

may also be cut off or may get disconnected

depending on the radio wave conditions, DECT

phones or any other WiFi 11b appliances. The

standard values of the transmission speed are

the theoretical maximum values for the wireless

standards. They are not the actual speeds of data

transmission.

• The location where the transmission is most effective

differs depending on the usage environment.

• The Wireless LAN adaptor should be connected

directly to the TV’s USB port. USB hubs are not

supported. You can plug your wi dongle into the

supplied dock In cases where network quality is

poor and the wi dongle needs to be placed to a

location with better signal quality.

• The Wireless LAN adaptor supports 802.11 a,b,g &

n type modems. It is highly recommended that you

should use the IEEE 802.11n communication protocol

in order to avoid any possible problems while watching

videos.

• Use the other USB input, if you experience problems

with audio/video performance.

• You must change your modem’s SSID when there are

any other modems around with the same SSID. You

can encounter connection problems otherwise. Use

a wired connection if you experience problems with a

wireless connection.

ConguringWirelessDeviceSettings

To enable Wi-Fi features, plug in the Wi-Fi dongle to

one of the USB ports. Open the Network Settings menu

and select Network Type as Wireless Device to start

connection process.

Press the YELLOW button to scan the wireless

networks. A list of available networks will be displayed.

Please select your desired network from the list.

Note: If the modem supports N mode, you should set

N mode settings.

If the selected network is protected with a password,

please enter the correct key by using the virtual

keyboard. You can use this keyboard via the navigation

buttons and the OK button on the remote control.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 34 35

Komentarze do niniejszej Instrukcji

Brak uwag

Finlux 47F9076-T Instrukcja Użytkownika Strona 19

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Telewizory LCD Finlux 47F9076-T